Hallo
ich habe zurzeit einen Intel PIII 600MHz CPU. Ich möchte jetzt gerne auf einen Intel Cleron 2.0 GHz CPU aufrüsten. Kann ich dass überhaupt? Passt der neue CPU in den alten Halter?
Hier ist mein Mainboard:
Computer System
Manufacturer : VIA Technologies, Inc.
Model : VT82C692BX
Unique ID : 00000000-00000000-00000000-00000000

System Mainboard
Manufacturer : Legend QDI
MP Support : No
Model : Advance-9
Version : V1.XX
BIOS ID : 12/17/1999-693A/596B-W97-2A6LGQ1FC-00

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 1024MB
Bank 1 - BANK_0 : DIMM Synchronous SDRAM 128MB @ 66Mt/s
Bank 2 - BANK_1 : Empty
Bank 3 - BANK_2 : Empty

System Chipset
Model : Unknown (1106) Unknown (0691)
Bus(es) : ISA AGP PCI USB SMBus/i2c
Front Side Bus Speed : 1x 133MHz (133MHz data rate)
Max FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHz
In Order Queue Depth : 1 req(s)

Logical/Chipset Memory Banks
Bank 0 Setting : 64MB SDRAM 7-1-1-1R 4-1-1-1W 3-2-2CL
Bank 1 Setting : 64MB SDRAM 7-1-1-1R 4-1-1-1W 3-2-2CL
Speed : 1x 100MHz (100MHz data rate)
Multiplier : 1/1.33x
Power Down Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : PCB173G-B5 128MB 16x(8Mx8) SDRAM PC100-222-622 (CL3 upto 125MHz) (CL2 upto 100MHz)

Environment Monitor 1
Model : Winbond W83782D ISA
Version : 3.00
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 125.0°C / 257.0°F
CPU Temperature : 28.5°C / 83.3°F
Power / Aux Temperature : 51.0°C / 123.8°F td

Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 5114rpm

Voltage Sensor(s)
CPU Core Voltage : 1.63V
Aux Voltage : 1.46V
+3.3V Voltage : 3.34V
+5V Voltage : 5.00V
+12V Voltage : 12.04V
-12V Voltage : -12.28V
-5V Voltage : -5.80V
Standby Voltage : 5.08V
Battery Voltage : 2.96V

AGP Bus
Version : 1.00
Speed : 66MHz
Current Data Transfer Rate : 2x 66MHz (132MHz data rate)
Side Band Enabled : No
Side Band Support : Yes
Aperture Size : 64MB

PCI Bus(es)
Version : 2.10
No Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/4x

LPC Hub Controller 1
Model : Unknown (1106) Unknown (0596)
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz

USB Controller 1
Model : Unknown (1106) Unknown (3038)
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : Intel PIIX4 SMBus / compatible
Speed : 16kHz

Expansion Slot(s)
ISA : ISA 16-bit 5V FullLength
ISA : ISA 16-bit 5V FullLength
PCI (9h) : PCI 32-bit 5V FullLength Available
PCI (Ah) : PCI 32-bit 5V FullLength InUse (Unknown (134D) Unknown (7892))
PCI (Bh) : PCI 32-bit 5V FullLength InUse (Unknown (10EC) Unknown (8139))
PCI (Ch) : PCI 32-bit 5V FullLength Available
PCI (Eh) : PCI 32-bit 5V FullLength InUse (Unknown (1073) Unknown (000D))
AGP (8h) : AGP 32-bit 5V FullLength Available (Unknown (10DE) Unknown (002D))

Port Connector(s)
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO Compatible - Floppy / None
COM1 : Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB25 pin female / DB25 pin female
Keyboard : Keyboard Port - None / PS/2
PS/2 Mouse - No Detected : Mouse Port - PS/2 / PS/2
USB : USB - None / None

Ist dieses Mainboard kompatibel mit dem neuen CPU? Muss ich auch noch neue RAM-Blöcke kaufen?

Vielen Dank für euere Antworten!
Gruss